The VAL6 FIR2000-E 18kW Industrial Far-Infrared Heater is designed to deliver wide, targeted radiant heat across workshops, warehouses, factories, event spaces and other suitably ventilated professional environments.
Unlike a conventional forced-air heater, the FIR2000-E transfers infrared heat directly towards people, equipment and surfaces without relying on continuous air movement. This makes it particularly effective in large, draughty or partially open working areas where warm air can quickly escape.
Its thin, flat design provides a wide radiant surface while occupying minimal floor depth. A built-in thermostat allows the surrounding temperature to be controlled, while the 45-litre fuel tank provides up to 22 hours of stated continuous operation.
The FIR2000-E operates using diesel or kerosene and requires a 230V / 50Hz electrical supply.
Wide Far-Infrared Heat
The FIR2000-E uses far-infrared radiation to transfer heat directly towards objects and people within its heating area. This provides focused warmth without first having to heat the complete volume of air in the building.
Its large tube-style radiant surface distributes heat across a wide area, making the heater suitable for workstations, production areas and other locations where broad, targeted heat is required.
Because infrared heat is less dependent on air circulation, the FIR2000-E can remain effective in draughty environments where conventional warm-air heating may be less practical.
Key Features and Benefits
- Powerful 18kW industrial heat output
- Far-infrared technology heats people, equipment and surfaces directly
- Wide radiant heating area
- Non-open-flame heater design
- Low operating-noise level of approximately 50dB(A)
- Built-in thermostat supports temperature control
- Operates using diesel or kerosene
- Large 45-litre fuel tank
- Up to 22 hours of stated continuous operation
- Fuel-consumption rate of approximately 1.72 litres per hour
- Slim, flat design reduces the required floor depth
- 230V / 50Hz electrical supply
- Low electrical consumption during operation
- Flame-monitoring system
- Overheat protection
- Motor-overheat protection
- Over-current protection
- Tip-over safety switch
- Suitable for industrial and commercial heating applications
Suitable Applications
The VAL6 FIR2000-E is suitable for heating properly ventilated professional environments including:
- Workshops
- Factories
- Warehouses
- Construction areas
- Industrial workstations
- Agricultural buildings
- Vehicle-maintenance facilities
- Loading and dispatch areas
- Event spaces
- Equipment and material-drying areas
- Large or draughty commercial spaces
- Partially open working environments
Application note: Suitability depends on the ventilation, layout, dimensions and conditions of the intended working area.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | VAL6 |
| Model | FIR2000-E |
| Daly Industrial Supply Product Code | HRP1000 |
| Heater Type | Industrial far-infrared heater |
| Heat Output | 15,500kcal/h |
| Approximate Heat Output | 18kW |
| Fuel | Diesel or kerosene |
| Fuel Consumption | Approximately 1.72 litres per hour |
| Fuel-Tank Capacity | 45 litres |
| Stated Continuous Operating Time | Up to 22 hours |
| Electrical Supply | 230V / 50Hz |
| Power Consumption During Ignition | 80W |
| Power Consumption During Operation | 65W |
| Operating Noise Level | Approximately 50dB(A) |
| Dimensions | 1,322 × 1,235 × 320mm |
| Temperature Control | Built-in thermostat |
| Flame Monitoring | Yes |
| Overheat Protection | Yes |
| Motor-Overheat Protection | Yes |
| Over-Current Protection | Yes |
| Tip-Over Switch | Yes |
Built-In Temperature Control
The FIR2000-E features a built-in thermostat that allows the heater to respond to the temperature around the unit.
This supports more controlled operation in workshops, production areas and other professional environments where maintaining an appropriate working temperature is important.
Heating requirements will vary according to building size, insulation, ventilation, external temperature and the distance between the heater and the target area.
Low-Noise Industrial Heating
The FIR2000-E has a stated operating noise level of approximately 50dB(A). Its infrared heating method does not require the level of continuous high-volume airflow associated with larger forced-air heaters.
This makes it suitable for professional environments where excessive heater noise or strong air movement could interfere with work.
Long Operating Time
The integrated 45-litre fuel tank provides up to 22 hours of stated continuous operation. The published fuel-consumption rate is approximately 1.72 litres per hour.
Please note: Actual operating time may vary according to environmental conditions, thermostat operation, fuel quality and how the heater is used.
Safety Features and Operating Guidance
The VAL6 FIR2000-E incorporates several operating and safety systems, including:
- Flame-monitoring system
- Overheat protection
- Motor-overheat protection
- Over-current protection
- Tip-over safety switch
These systems support safe operation but do not replace correct positioning, ventilation, maintenance and supervision.
Important: Use the heater only in a suitably ventilated environment and follow the manufacturer’s operating instructions. Fuel-burning heaters produce combustion gases and must not be operated in enclosed or poorly ventilated spaces.
Keep the heater away from flammable materials, combustible dust, fuel containers and obstructed exits. Never refuel or move the heater while it is operating or still hot.
Why Choose the VAL6 FIR2000-E?
The VAL6 FIR2000-E is designed for professional users who need wide, focused heat across a large working area. Its far-infrared heating system transfers warmth directly towards people and surfaces, making it effective in spaces where heated air would otherwise rise or escape.
Its 18kW output, 45-litre fuel tank and low-noise design make it suitable for extended industrial use. The built-in thermostat, comprehensive safety systems and thin profile further support practical operation in busy working environments.
Frequently Asked Questions
What is the heat output of the VAL6 FIR2000-E?
The FIR2000-E produces 15,500kcal/h, equivalent to approximately 18kW.
Which fuels can the FIR2000-E use?
The heater is designed to operate using diesel or kerosene. Always use fuel that meets the manufacturer’s requirements.
What size is the fuel tank?
The FIR2000-E has a 45-litre integrated fuel tank.
How long can the heater operate?
VAL6 states a continuous operating time of up to 22 hours. Actual operating time may vary according to thermostat activity, fuel quality and working conditions.
How much fuel does it consume?
The stated fuel-consumption rate is approximately 1.72 litres per hour.
Does the FIR2000-E require electricity?
Yes. It requires a 230V / 50Hz supply. Electrical consumption is approximately 80W during ignition and 65W during operation.
Does it have a built-in thermostat?
Yes. The FIR2000-E includes a built-in thermostat for temperature control.
Is the FIR2000-E a fan heater?
No. It is a far-infrared radiant heater. It transfers heat directly towards people, objects and surfaces rather than depending on high-volume warm-air circulation.
Is it suitable for draughty buildings?
Its infrared heating method makes it suitable for targeted heating in appropriately ventilated, draughty or partially open professional environments.
How loud is the FIR2000-E?
The stated operating-noise level is approximately 50dB(A).
Can it be used in an enclosed space?
The FIR2000-E is a fuel-burning heater and must only be operated with suitable ventilation. It should not be used in enclosed or poorly ventilated spaces.
VAL6 Heaters from Daly Industrial Supply
Daly Industrial Supply supplies VAL6 infrared heaters, spare parts and professional heating equipment from Cork.
If you need help determining whether the FIR2000-E is suitable for your premises or heating requirements, contact Daly Industrial Supply on 021 450 0051.
Order your Spare Parts Here